Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 154

Table 65: Stacking Methods for X460-G2 Switches
Stacking Method
SummitStack
(rear panel, with VIM)
See Native Stacking for X460-G2 Switches
154.
SummitStack-V160
(rear panel, with VIM)
See Native Stacking for X460-G2 Switches
154.
SummitStack-V
(front panel 10G models)
See Alternate Stacking for X460-G2 Switches
page 155.
Native Stacking for X460-G2 Switches
X460-G2 1-gigabit switch models (GE4) support native stacking through an attached VIM-2ss or
VIM-2q module.
The VIM-2ss module permits stacking using the standard SummitStack cables.
Figure 121: VIM-2ss SummitStack Module
1 = LEDs
The VIM-2q module connects to QSFP+ cables to form stacks using the SummitStack-V160 protocol.
Figure 122: VIM-2q Port Option Card
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Speed per Link (HDX)
10 Gbps
on page
40 Gbps
on page
10 Gbps
on
2= Stacking ports
Building Stacks
Cable Type and Lengths
0.5m, 1.5m, 3.0m, 5.0m
QSFP+
0.5m–40km
SFP+
154