Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 61

For information about QSFP28 and QSFP+ optical modules, see the
Transceivers Installation
•
Ethernet management port (10/100/1000BASE-T).
•
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local
management.
•
Front panel USB port.
•
Rear dual PSU power slots with front-to-back or back-to-front airflow.
•
Four rear slots for fan modules with front-to-back or back-to-front airflow.
Note
Two additional fan slots are unused. Do not remove the cover plate from the unused slots.
Figure 70: X590-24x-1q-2c Front Panel
1 = Console/management port
2 = USB port
3 = 1 Gb/10GBASE-X SFP+ ports
Figure 71: X590-24x-1q-2c Rear Panel
1 = Grounding lug
2 = Replaceable fan modules
ExtremeSwitching X590 Series Switch LEDs
The following tables describe the meanings of the LEDs on the front panel of the X590 series switch.
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Guide.
4 = 10Gb/40Gb QSFP+ port
5 = 10Gb/25Gb/40Gb/50Gb/100Gb QSFP28 ports
ExtremeSwitching Switches
Extreme Networks Pluggable
3 = AC power input
61