Half-Duplex To Full-Duplex Converter Technical Specifications - Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual

Table 247: Fan and Acoustic Sound (continued)
V400-48t-10GE4
V400-48p-10GE4
Standards and Environmental Data
Table 248: Safety Standards
North American Safety of ITE
European Safety of ITE
International Safety of ITE
Table 249: V400 Environmental Data
Operating conditions

Half-Duplex to Full-Duplex Converter Technical Specifications

The Half-Duplex to Full-Duplex Converter can be attached to switch ports to enable communication
over half-duplex connections with older Ethernet devices.
Order the converter using one of the following part numbers:
•
10958: HDX to FDX Converter, Rest of World
•
10959: HDX to FDX Converter: North America
Other specifications:
•
8.8 Gbps switching capacity
18
At 25°C and 50% PoE load where applicable
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Bystander Sound Pressure
dB(A)
43.4 (Duty 30%) /
61.1 (max.)
48.5 (Duty 30%) /
65.5 (max.)
UL 60950-1 2nd Ed., A2:2014, Listed Device (US)
CSA 22.2 #60950-1-07 2nd Ed., 2014-10 Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
EN 60950-1:2006 +A11+A1+A12+A2
EN 60825-1:2007 (Lasers Safety)
IEC 60950-1:2005 2nd+A1:2009+A2:2013
2014/35/EU Low Voltage Directive
CB Report & Certificate per IEC 60950-1:2005 2nd Ed. + National Differences
AS/NZX 60950-1 (Australia /New Zealand)
Temperature: 0°C to 50°C (32°F to 122°F) for non-PoE models
Temperature: 0°C to 45°C (32°F to 113°F) for PoE models
Storage and transportation temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95% relative humidity, non-condensing
Altitude: 0 to 3,000 meters (9,850 feet)
Technical Specifications
18
in Declared Sound Power
18
(L ) in bels
WAd
4.6 (Duty 30%) /
6.4 (max.)
5.1 (Duty 30%) /
6.8 (max.)
374