Chapter 3: Expansion Modules - Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual

3
Expansion Modules
V400 Virtual Port Extender
Solid-state Drives
Optional Ports for X460-G2 Switches
Several different hardware accessories are available for expanding the capabilities of your Extreme
Networks switch. Collectively, they are referred to as expansion modules.
•
Port option cards and versatile interface modules (VIMs) are installed in dedicated slots at the back
of the switch to provide optional I/O ports or stacking ports. These optional items add 10-Gbps
copper or fiber I/O ports to the back panel of compatible switches. If no card or module is installed,
the option slot is covered by a blank panel.
•
The TM-CLK Clock Module is required for Synchronous Ethernet (SyncE) processing on the X460-G2
switch.
The following table lists the types of expansion modules and the switch series with which they are
compatible.
Table 50: Compatibility of Expansion Modules
Module Type
VIM2
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Name No. of Ports
VIM-2q 2
VIM-2ss 2
VIM-2t 2
VIM-2x 2
Type of Ports
40 gigabit QSFP+ optical
ports
high-performance
SummitStack ports
10-gigabit copper BASE-T
ports
10-gigabit SFP+ optical ports
Compatible Switch
Series
X460-G2
X460-G2
X460-G2
X460-G2
113