Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 227

3 Attach the mounting brackets as follows:
a Place a mounting bracket over the mounting holes on one side of the EPS-C2 (see
b Insert the screws and fully tighten them using a screwdriver.
Figure 172: Attaching the Mounting Bracket to the EPS-C2 Chassis
c Attach the mounting bracket for the other side of the EPS-C2.
4 Slide the EPS-C2 into the rack and secure it using appropriate rack-mount screws.
See Figure 173.
Figure 173: Sliding the EPS-C2 into the Rack and Securing it
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Installing External Power Supplies
Figure 172).
227