Figure 3: ExtremeSwitching X440-G2-12p-10GE4 Front Panel
1 = Stack number indicator
2 = Console port/Ethernet management port
3 = USB port (active with ExtremeXOS version 22.2 or later)
Figure 4: ExtremeSwitching X440-G2-12p-10GE4 Rear Panel
1 = Redundant power input
2 = Grounding lug
ExtremeSwitching X440-G2-24t-10GE4 Switch Ports and Slots
The ExtremeSwitching X440-G2-24t-10GE4 switch ports and slots include:
•
24 front panel ports of 10/100/1000BASE-T (RJ45). Both half-duplex and full-duplex
communication are supported on ports 1 through 16. Ports 17 through 24 are full-duplex only.
•
Four unpopulated front panel 1GBASE-X SFP combination ports.
•
Four unpopulated rear panel 1GBASE-X SFP+ ports that can be used as either 1Gb ports or 10Gb
ports, where the 10Gb configuration requires an upgrade through additional licensing..
Alternately, you can convert two of the ports to stacking ports using the enable stacking-
support command. Doing so would provide you with the option of two 1Gb ports and two stack
ExtremeSwitching and Summit Switches: Hardware Installation Guide
ExtremeSwitching Switches
4 = 10/100/1000BASE-T copper ports
5 = SFP Ports upgradeable to 10GBASE-X
3 = AC power input socket
17