Platform Power Supplies; Power Cord Types And Order Codes - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GTX-HT-PWR+ Installation Manual

Platform power supplies

The Virtual Services Platform 4450GTX-HT-PWR+ model supports two field-replaceable AC power
supplies. One power supply is supplied with the chassis.
You can install a redundant power supply to support load sharing or to provide power redundancy.
The following table describes the Virtual Services Platform 4000 compatible AC power supplies and
their part numbers (order codes). All the power supplies are EUED RoHS 5/6 compliant.
Note:
The 1000W AC power supply uses the IEC 60320 C16 AC power cord connector.
Use the order codes to order a replacement for the primary PSU or to order a redundant PSU for
your VSP 4000 system.
Note:
Power cords must be ordered separately. Ensure you order the correct power cord for your
region. For more information, see
Table 2: Power supply order codes
VSP 4000 PSU
1000W AC POE+
power supply

Power cord types and order codes

To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table.
Table 3: Power cords for power distribution units
Order Code
700512240
700512242
Table 4: Power cords for use with C14 or C16 power supply side connector
Order Code
AA0020071-E6
August 2018
Power cord types and order codes
Usage
For use in VSP 4450GTX-HT-PWR+
model.
Length Power supply side
connector
3 m C15
3 m C15
Description
Power cord 2.5 m IEC C15 to BS1363
Installing the Virtual Services Platform 4450GTX-HT-PWR+
Platform power supplies
on page 11.
Part number
(order code)
EC4005A03-E6
Power source Safety Approval
side connector
C14 USA
C14 International except
Japan and Taiwan
Region
United Kingdom
Table continues...
11