Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 157

Summit X460-G2 (1G Models Using VIM Ports) Stack Configuration Guidelines
Before deploying a new stack with Summit X460-G2 1-gigabit switch models (GE4), consider the
following guidelines:
•
SummitStack-V stacking is supported through an attached VIM: VIM-2x, VIM-2q, or VIM-2ss.
•
We recommend against mixing X450-G2, X460-G2, X770, and X670-G2 switches in a stack if the
desired routing table exceeds the supported limit.
•
Support is available on ExtremeXOS version 16.1 or later.
X590 Stacking
X590 series switches can be stacked with other X590 switches, with X690 switches, X695 switches, and
with X870 switches. X590 series switches support native stacking using front-panel data ports 29 and
33.
Alternate stacking is not supported for X590 switches.
The stacking-support option is disabled by default for all X590 switches. For more information, see
Enabling and Disabling the Stacking-Support Option
Table 67 summarizes stacking support for X590 switches.
Note
Only QSFP28 direct-attach passive copper cable, at lengths up to 5 meters, can be used in
X590 stacking ports.
Table 67: Stacking Methods for X590 Switches
Stacking Method
SummitStack-V400 (Front panel ports 29, 33)
SummitStack-V160 (Front panel ports 29, 33)
X620 Stacking
See X620 Stacking
The stacking-support option is enabled by default for X620 switches. For more information, see
Enabling and Disabling the Stacking-Support Option
The stacking port selection option, which allows you to choose between native and alternate ports, is
enabled by default for X620 switches. For more information, see
Stacking Ports on page 162.
Table 68: Stacking Methods for X620 Switches
Stacking Method
SummitStack-V (Front panel 10G models)
ExtremeSwitching and Summit Switches: Hardware Installation Guide
on page 63 for a full description of the X620 switch's stacking capabilities.
on page 149.
Speed per Link (HDX) Cable Type and Lengths
106 Gbps 0.5 m – 5 m
QSFP28
42 Gbps 0.5 m – 5 m
QSFP28
on page 149.
Selecting Native and Alternate
Speed per Link (HDX) Cable Type and Lengths
10 Gbps 0.5m–40km
SFP+
Building Stacks
157