Table of Contents
Advertisement
Pluggable Transceiver Modules
Pluggable Transceiver Modules
Extreme Networks offers several optical transceiver modules for transmitting and receiving data over
optical fiber rather than through electrical wires.
Optical Cables
Direct-attach copper and fiber cables provide connections between unpopulated SFP+, SFP28, QSFP+,
and QSFP28 ports.
Installing Internal AC Power Supplies
The following AC internal power supplies (PSUs) are available for 5420 Series switches:
150 W AC PSU
Part number XN-ACPWR-150W is compatible with 5420F-24T-4XE, 5420F-24S-4XE,
5420F-48T-4XE, 5420M-24T-4YE, and 5420M-48T-4YE switch models.
600 W AC PSU
Part number XN-ACPWR-600W is compatible with 540F-24P-4XE and 5420F-8W- 16P-4XE switch
models.
920 W AC PSU
Part number XN-ACPWR-920W is compatible with 5420F-48P-4XE, 5420F-48P-4XL,
5420M-24W-4YE, 5420M-48W-4YE, 5420M-16MW-32P-4YE switch models.
1200 W AC PSU
Part number XN-ACPWR-1200W is compatible with 5420F-16W-32P-4XE and
5420F-16MW-32P-4XE switch models.
2000 W AC PSU
Part number XN-ACPWR-2000W is compatible with 5420M-48W-4YE and 5420M-16MW-32P-4YE
switch models.
For installation instructions, see
Supply
on page 78.
Selecting Power Cords for AC Power Supplies
An AC power cord is not included with an AC power supply.
You can purchase AC power cords for use in the US and Canada from Extreme Networks or from your
local supplier. The cord must meet the requirements listed under
Powered Switches and AC Power Supplies
Install a 150 W, 600 W, 920 W, 1200 W, or 2000 W Internal AC Power Supply
Warning
To prevent an electrical hazard, make sure that the AC power cord is not connected to the
power supply before you install the power supply in the power supply bay.
78
ExtremeSwitching 5420 Series Hardware Installation Guide
Install a 150 W, 600 W, 920 W, 1200 W, or 2000 W Internal AC Power
on page 110.
Installing Your Switch
Power Cord Requirements for AC-
Hide quick links:
Advertisement
Table of Contents
