Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 89

•
RJ45 Ethernet management port.
•
USB port for access to external storage.
•
USB console port.
•
RJ45 RS-232c serial console port used to connect a terminal and perform local management.
•
LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see ExtremeSwitching X870 Series Switch LEDs
Figure 95: ExtremeSwitching X870-96x-8c Front Panel
1 = Precision Timing ports (not supported)
2 = Storage port: micro USB A
3 = Console port: micro USB B
The rear panel of the ExtremeSwitching X870-96x-8c switch includes:
•
Six replaceable fan modules.
•
Two power supply bays for either AC or DC power supplies.
Figure 96: ExtremeSwitching X870-96x-8c Rear Panel
1 = Grounding lug
2 = Fan modules
ExtremeSwitching X870 Series Switch LEDs
The following sections describe the meanings of the LEDs on the ExtremeSwitching X870 series
switches.
ExtremeSwitching and Summit Switches: Hardware Installation Guide
on page 89.
4 = QSFP28/QSFP+ Ethernet ports
5 = Console port: RJ45
6 = Ethernet management port: RJ45
3 = AC power supplies
ExtremeSwitching Switches
89