Active And Passive Stereo 3D Configurations - Christie Mirage M Series Setup Manual

3.4.2

Active and Passive Stereo 3D Configurations

Typical hardware configurations for active and passive Stereo 3D systems are shown in
14.
Figure 13 - Mirage M Series - Typical Stereo 3D Configuration: With Active Glasses
Figure 14 - Mirage M Series - Typical Stereo 3D Configuration: With Passive Glasses
Appropriate Stereo 3D Source: Use stereo 3D application software with your 3D video source (usually a
workstation or PC). The source must also provide a separate stereo 3D synchronization signal that precisely
controls when left/right fields are visible through the viewer's glasses. This separate signal is usually provided
using a VESA 3 pin stereo port.
Mirage M Series Setup Guide
020-100592-02 Rev. 1 (11-2010)
Section 3: Operation
Figure 13 and Figure
3-15