Table of Contents
Advertisement
＜Toc＞ ＜Ind＞
2.1.2 Run Mode
The DX Series has three types of modes depending on the level of operation.
Operation Mode
This mode is used during normal monitoring operation.
Most operations such as switching the displayed group
or display types are performed using the operation keys.
Operations such as alarm acknowledgement, message
entry, and screen snapshot are carried out by displaying
a menu with the [FUNC] key and then using the soft
keys.
SET Mode
This mode is used to change settings that are changed
often such as the range and waveform update rate. The
[MENU] key is used to display the setting parameters.
Parameters that affect the data that are being recorded
cannot be changed unless the recording is stopped.
This prevents erroneous operation.
SETUP Mode
This mode is used to change the operating environment
of the DX100/DX200 such as the input format or
recording format.
2.1.3 Functional Construction
The DX100/200 is comprised of the following functions.
Input unit
Standard
computation
Filter
All Rights Reserved. Copyright © 2000, Yokogawa Electric Corporation
[START] key
Display unit
LCD
Data storage functions
Internal memory
Standard Function
Alarm function
Security function
Ethernet
Power ON
Operation mode
[MENU] key
SET Mode
After pressing the
[MENU] key,
keeppressing the
[FUNC] key for
three seconds.
SETUP Mode
End of configuration
Removable
storage media
Optional Function
Computation / Report
Batch function
Remote control
Alarm relay output
Serial Communication
TI 04L01A01-02E
5
Advertisement
Table of Contents
