Connections
SIM
Base
unit
Headset connector The Headset connector is used to connect a 2.54mm micro-
USB connector This USB host connector is used to connect the HST-3000 to
Ethernet connector The Ethernet connector is used to connect a 10/100 BaseT
The HST-3000 top panel, is used to connect test leads, an
audio headset, or to connect to an external output device.
Figure 1
shows the top panel.
Headset
connector
Figure 1
HST-3000 top panel
The connectors on the top panel are described in the following
sections.
phone/speaker audio headset.
a printer (device) for transferring test statistics.
Ethernet cable. If connecting to a PC, a cross-over cable
should be used.
HST-3000 IP Video Testing User's Guide
Chapter 1 Getting Started
USB host
Ethernet
connector
connector
Quick tour
5