Replacing A Process; Editing A Process; Saving As New Process - Miltenyi Biotec MultiMACS Cell24 Separator Plus User Manual

14 Tap YES to start the process or NO to go to the Start menu.
6.2

Replacing a process

If 10 custom processes have already been saved in the process list, an obsolete process has to be replaced.
1 When trying to save a new process the following screen is shown. Select a process you want to delete and
tap the process name.
2 Tap YES to confirm the replacement. Alternatively, tap NO or the Back button to go back.
3 After saving the new process to the process list, tap YES to start the process or tap NO or ESC to return to
Start menu.
the
6.3

Editing a process

The pre-defined processes
as a new process after changing the process parameters. Edited parameters of custom processes can be saved in
the existing process or as a new process while keeping the original process in the list.
6.3.1

Saving as new process

1 Go to the Process menu of the process you want to edit and tap EDIT .
2 Tap SAVE A NEW PROCESS to save the changed process parameters as a new process while keeping the
original process in the list.
3 Wait for a few seconds or tap OK .
4 Enter the name for the process and set the parameters for the new process. Follow the steps 4-12 of chapter
Creating a process on page 65 .
DEPLETE , POSSEL , POSSEL2 , POSSEL_SCA , and POSSEL2_SCA must be saved
6
67