Target Cell Fraction And Waste Container - Miltenyi Biotec MultiMACS Cell24 Separator Plus User Manual

4.3

Target cell fraction and waste container

To collect target cells deep well plates or 5 mL tubes can be used. The default target cell container in the pre-
defined processes is a deep well plate with a height of 44.0 mm.
plates required for each pre-defined process.
If you want to use deep well plates with other heights or 5 mL tubes, create a custom process or edit a process
and save it separately (refer to
tubes use MACS Elution Chamber lid II and the MultiMACS 5 mL Tube Rack.
Process
DEPLETE
POSSEL, POSSEL_SCA
POSSEL2, POSSEL2_SCA
Table 4.2: Number of deep well plates required for pre-defined processes.
For waste collection use deep well plates. The default setting for the deep well plate height is 44.0 mm. To use
plates with other heights create a custom process or edit a process and save it separately (refer to
process on page 65 ).
Program
DEPLETE
POSSEL
POSSEL_SCA
POSSEL_2
POSSEL2_SCA
Table 4.3: Possible target cell fraction and waste container for the pre-defined processes.
Creating a process on page 65 ). For the collection of labeled cells in 5 mL
Number of deep well
plates required
2
2
3
Labeled cells
—
Deep well plate or 5 mL tubes
Deep well plate or 5 mL tubes
Deep well plate or 5 mL tubes
Deep well plate or 5 mL tubes
Table 4.2 shows the number of deep well
Fraction
Equilibration buffer
Unlabeled fraction
Equilibration buffer and unlabeled fraction
Labeled fraction
Equilibration buffer
Unlabeled fraction
Labeled fraction
Unlabeled cells
Deep well plate, height 44.0 mm;
other heights and 5 mL tubes in
custom programs
—
—
Deep well plate, height 44.0 mm;
other heights and 5 mL tubes in
custom programs
Deep well plate, height 44.0 mm;
other heights and 5 mL tubes in
custom programs
4
Creating a
Waste
Deep Well Plate
height 44.0 mm;
other heights
and 5 mL tubes
in custom
programs
57