Configuring Objects That Require Reboo - Avaya AP-3 User Manual

Using Tables & User Strings
Configuring Objects that Require Reboot
Certain objects supported by Avaya Wireless devices require the device
to be rebooted in order for the changes to take effect. In order to inform
the end-user of this behavior, the CLI shall provide informational
messages when the user has configured an object or object(s) that requires
the device to be rebooted. The following message shall be displayed as a
result of the configuring such object or objects.
Example 1: Configuring objects that require the device to be
rebooted
The following message is displayed every time the user has configured an
object that requires the device to be rebooted.
[Device Name]>set ipaddr 135.114.73.10
In order for this change to take effect, the device is required to
be rebooted.
6-32 Avaya Wireless AP-3 User's Guide