Set Http Interface Management Services - Avaya AP-3 User Manual

Step 7: Configure your Management Interfaces

Set HTTP Interface Management Services

1. In the Web Interface, click the Configure button and select the
Management tab.
2. Choose the Services sub-tab.
3. For each service, there is a list of associated settings. From the drop-
down menu, select which physical interface(s) can be used to manage
the AP-3 device using the Web interface. For example, to allow Web
configuration via the Ethernet network only, set HTTP Interface
Bitmask to Ethernet. The available configuration options are:
• Disabled (all interfaces)
• Ethernet only enabled
• Wireless A only enabled
• Wireless B only enabled
• All Interfaces enabled
4. Enter the HTTP communication port number. Default is 80.
Note: See Configuring Management Service Interfaces
on the SNMP, Telnet, and other HTTP parameters that can be
configured from the Services page.
2-62
for information
Avaya Wireless AP-3 User's Guide