Step1: Initialize Units And Download Image Files; Scantool Program - Avaya AP-3 User Manual

Step1: Initialize Units and Download Image Files

Step1: Initialize Units and Download Image Files

SCANTOOL Program

Use ScanTool to initialize units and download image files for any unit
connected to the LAN subnet. You can set the IP Address, IP Address
Type (Static or Dynamic), and other values. The SCANTOOL.exe
application is included on the installation CD-ROM.
Note: ScanTool can be installed without prior bench initialization. To
track units, you must record the MAC Address and physical
location of each unit during installation. Since ScanTool identifies
each unit by its MAC Address, you can install multiple units
simultaneously and initialize them from ScanTool.
The factory default for the AP-3 is for DHCP operation. If you are using
DHCP, the unit requests an IP Address from the DHCP server when
rebooted or powered up. Since the IP Address could come from a large
DHCP address pool, it may be difficult to identify the IP Address
assigned to the unit.
2-6 Avaya Wireless AP-3 User's Guide