Parameter Tables - Avaya AP-3 User Manual

Parameter Tables

Objects contain groups that contain both parameters and parameter tables.
Use the following Tables to configure the Access Point. Columns used on
the tables include:
• Name - Parameter, Group, or Table Name
• Type - Data type
• Values - Value range, and default value, if any
• Access = access type, R = Read Only (show), RW = Read-Write
(can be "set"), W = Write Only
• CLI Parameter - Parameter name as used in the Access Point
Access Point network objects are associated with Groups. The network
objects are listed below and associated parameters are described in the
following Parameter Tables:
• System Parameters - Access Point system information
• Inventory Management Information - Hardware, firmware, and
software version information
• Network Parameters - IP and Ethernet information
• DHCP Server Parameters - Enable or disable dynamic host
configuration
• VLAN Parameters - Enable, disable, and configure VLAN
Avaya Wireless AP-3 User's Guide
Parameter Tables
6-59