Other Network Settings
Figure 6-14: Result of "show serial" CLI Command
Configure MAC Access Control
Setup MAC (Address) Access Control Table
[Device Name]>set macaclstatus enable
[Device Name]>set macacloptype <passthru, block>
[Device Name]>reboot 0
Add an Entry to the MAC Access Control Table
[Device Name]>set macacltbl <index> macaddr <MAC Address,
[Device Name]>show macacltbl
Disable or Delete an Entry in the MAC Access Control Table
[Device Name]>set macacltbl <index> status <disable/delete>
[Device Name]>show macacltbl
Note: For larger networks that include multiple AP-3 devices, you may
prefer to maintain this list on a centralized location using the
RADIUS parameters (see Set RADIUS Parameters).
6-54
such as 00:12:34:56:78:ab>status enable
Avaya Wireless AP-3 User's Guide