There Is No Data Link - Avaya AP-3 User Manual

4. Try using a different Ethernet cable – if it works, there is probably a
faulty connection over the long cable, or a bad RJ45 connection.
5. Check power plug and hub.
6. If Ethernet link goes down, check cable, cable type, switch, and hub.

There Is No Data Link

1. Verify that the indicator for the port is "on."
2. Verify that the AE is connected to the Ethernet network with a good
connection.
3. Verify that the Ethernet cable is Category 5 or better, and is less than
100 meters (approx. 3.25 ft.) in length from the Ethernet source to the
AP-3.
4. Try to connect a different device over the same port – if it works and
link is established, there is probably a faulty data link in the load.
5. Try to re-connect the load into a different output port (remember to
move the input port accordingly) – if it works, there is probably a
faulty output or input port in the AE or a bad RJ-45 connection.
Avaya Wireless AP-3 User's Guide
Symptoms and Solutions
5-15