Setting Up A Single Vlan Workgroup - Avaya AP-3 User Manual

VLAN Support
1. In the Web Interface, click the Configure button and select the
Interfaces tab
2. Enter a unique Network Name (SSID) for each NIC.
3. Select the Network tab and select the VLAN sub-tab.
4. Set the VLAN UserID for one NIC to 0.
5. Set the VLAN User ID for the other NIC to a value between 1 and
4094.
6. Place a checkmark in the Enable VLAN Protocol box.
7. Configure the wireless client with one of the two Network Names
based on VLAN membership.

Setting Up a Single VLAN Workgroup

The VLAN feature enables all wireless clients that access the network
through the same AP-3 to be configured as members of the same VLAN.
In this scenario, each wireless NIC is configured with the same VLAN
ID. The same VLAN header or tag is then applied to all traffic received
from wireless clients and transmitted on the wired or wireless backbone.
All wireless clients become members of the same VLAN.
4-20 Avaya Wireless AP-3 User's Guide