Managing The Ap-3 From A Wireless Host - Avaya AP-3 User Manual

2. Select the VLAN sub-tab.
3. Set the VLAN Management ID to a value between1 and 4094 (a
value of 0 disables VLAN management).
4. Place a checkmark in the Enable VLAN Protocol box.
Note: If a non-zero management VLAN ID is configured then
management access to the AP-3 is restricted to wired or wireless
hosts that are members of the same VLAN. Ensure your
management platform or host is a member of the same VLAN
before attempting to manage the AP-3 device.

Managing the AP-3 from a Wireless Host

The VLAN feature enables wireless clients to manage the AP-3. If the
VLAN Management ID matches a VLAN User ID, then those wireless
clients who are members of both VLANs will have AP-3 management
access.
1. In the Web Interface, click the Configure button and select the
Interfaces tab.
2. Enter a unique Network Name (SSID) for each wireless NIC.
3. Select the Network tab and the VLAN sub-tab.
4. Set the VLAN User ID for the wireless NICs in Slot A and Slot B to
values between 1 and 4094.
Avaya Wireless AP-3 User's Guide
VLAN Support
4-23