Overload" Indications; Recovery Procedures - Avaya AP-3 User Manual

Recovery Procedures

"Overload" Indications

1. Verify that you are not using any cross-over cable between the AE
output port to the AP-3 device.
2. Verify that there is no short over any of the twisted pair cable or the
RJ-45 connector.
3. Move the device into a different output port – if it works, there is
probably a faulty port or bad RJ-45 connection.
Recovery Procedures
The most common installation problems relate to IP Addressing. For
example, without the TFTP server IP Address, you will not be able to
download the AP Image to the AP-3. IP Address management is
fundamental. It is recommended that you create a chart to document and
validate the IP addresses for your system. You can also use the form
provided in Record Configuration
If the password is lost or forgotten, you will need to reset the AP-3 to
default values. The Reset to Factory Default Procedure resets
configuration settings, but does not change the current AP Image.
If the AP-3 has a corrupted software image, follow the Forced Reload
Procedure to erase the current AP Image and download a new image.
5-16
Settings.
Avaya Wireless AP-3 User's Guide