Telnet Cli Does Not Work - Avaya AP-3 User Manual

Avaya ap-3 access point: user guide

Hide thumbs Also See for AP-3:

Table of Contents

Symptoms and Solutions

3. Perform the following steps to verify or enter the pathname for the

a. Click the Help button in the Web Interface.

b. Select the Help Link tab located at the top of the screen.

c. Enter the pathname where the Help files are located.

d. Click OK when finished.

Telnet CLI Does Not Work

1. Make sure you have the proper IP Address. Enter your AP-3 IP

Address in the Telnet connection dialog, from a DOS prompt, type:

C:\> telnet <AP-3 IP Address>

2. Use the CLI over the serial port to check the SNMP Table, which can

be restricting access to Telnet and HTTP.

Avaya Wireless AP-3 User's Guide