GE Vivid T8 Basic Service Manual page 106

System Setup
3-6-5-3 Connect S-Video (For R1.x.x only)
NOTE:
3-6-5-4 Connect External Monitor through VGA port
3-22
Connect the cable to the S-Video Out port and the external
monitor. Select S-Video in the list of signal source menu on the
external monitor.
Figure 3-4. Connect S-Video
S-Video and composit out port are not supported on Vivid T8
system which is originally installed with software R2.x.x.
Connect VGA cable to the system and the external monitor
through VGA port. The screen displays on the external monitor.
The external monitor resolution should be 1280 x 1024.
Figure 3-5. Connect with VGA cable
Vivid T8/Vivid T8 Pro – Basic Service Manual
5718826-100 English Rev. 10