GE Vivid T8 Basic Service Manual page 254

Replacement Procedures
8-4-7-1 Loading the System Software with USB memory stick(continued)
WARNING
NOTE:
8-26
6. System USB memory stick will be loading. Wait for the
software installation to complete. (Typical installation time:
5-10 minutes). Status bar on the screen indicates progress.
Do not interrupt the software loading at any time.
Figure 8-12. Loading status
7. After finish updating system, remove the USB memory stick
and press any key to shut down the system.
If you do not remove the USB memory stick, the software
system loading process repeats when the system boots up.
Figure 8-13. System upgrade complete
Vivid T8/Vivid T8 Pro – Basic Service Manual
5718826-100 English Rev. 10