GE Vivid T8 Basic Service Manual page 130

System Setup
3-9-3 Setup connection to a DICOM server(continued)
3-46
6. Follow the steps below to change the IP-address settings:
a. From the IP-Address pull-down menu, select <Modify>
to display the IPs dialog.
Figure 3-31. Select <Modify>
b. Select the server that need to modify from the IPs dialog
and then select Modify.
Figure 3-32. Select the server to modify
c. Edit the Name and/or the IP address of the server.
Figure 3-33. Edit Name and/or Ip address
d. Select OK to save the new settings and close the
dialog.
Select Cancel to close the dialog and return to the
DICOM Properties dialog.
Vivid T8/Vivid T8 Pro – Basic Service Manual
5718826-100 English Rev. 10