GE Vivid T8 Basic Service Manual page 119

3-8-3-5 UP-D897/UP-D898 MD Printer Installation
3-8-3-5-1 Tools
3-8-3-5-2 Manpower
3-8-3-5-3 Preparations
3-8-3-5-4 Installation Procedure
Vivid T8/Vivid T8 Pro – Basic Service Manual
5718826-100 English Rev. 10
No special tools needed.
One person 5 min.
1. Unpack the UP-D897/UP-D898 MD Printer.
1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to Vivid T8/Vivid T8 Pro isolated USB
port.
Figure 3-19. UP-D897 connection
5. Refer to the Connectivity configure steps of
UP-D711MD Printer Installation' on page
Peripherals Installation
3-8-3-1 'Sony
3-28.
3-35