GE Vivid T8 Basic Service Manual page 118

System Setup
3-8-3-4 HP Officejet 100 Printer Installation
3-8-3-4-1 Tools
3-8-3-4-2 Manpower
3-8-3-4-3 Preparations
3-8-3-4-4 Installation Procedure
3-34
No special tools needed.
One person 5 min.
1. Unpack the HP Officejet 100 Printer.
1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to Vivid T8/Vivid T8 Pro isolated USB
port.
Figure 3-18. HP Officejet 100 connection
5. Refer to the Connectivity configure steps of
UP-D711MD Printer Installation' on page
Vivid T8/Vivid T8 Pro – Basic Service Manual
3-8-3-1 'Sony
3-28.
5718826-100 English Rev. 10