Electrical Safety - GE LOGIQ e Basic Service Manual

Introduction
Mechanical safety (continued)
NOTE:

Electrical safety

Safe practices
WARNING
1-24
Special care should be taken when transporting the Docking
Cart in a vehicle.
• Secure the unit in an upright position.
• Lock the wheels (brake)
Follow these guidelines to minimize shock hazards whenever
you are using the Ultrasound system:
• To minimize shock hazard, the equipment chassis must be
connected to an electrical ground.
• The Ultrasound system is equipped with a three-conductor
AC power cable. This must be plugged into an approved
electrical outlet with safety ground.
• The power outlet used for this equipment should not be
shared with other types of equipment.
• Both the system power cable and the power connector must
meet international electrical standards
Connecting a LOGIQ e to the wrong voltage level will most
likely destroy it.
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6