Receiving And Unpacking The Equipment - GE LOGIQ e Basic Service Manual

Docking Cart Setup

Receiving and Unpacking the Equipment

CAUTION
Unpacking Docking Cart
No. Steps
1. Cut off the two packing strap
(1-2) and remove them.
Then remove the two
reinforce cardboards and
remove the top cover.
2. Rotate the knob
counterclockwise until it is
loose and remove it.
11-8
When a new Docking Cart arrives, check that any components
are not damaged and are not in short supply. If shipping
damage or shortage occurs, contact the address shown in
Chapter 1.
The crate with the Docking Cart weighs approximately 59 kg.
Be prepared for a sudden shift of weight as the unit is removed
from its base (pallet).
Table 11-3: Procedure to take out Docking Cart
Corresponding Graphic
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6