GE LOGIQ e Basic Service Manual page 226

Diagnostics/Troubleshooting
PC Interactive (continued)
Restart the system after diagnostics
7-16
• Trackball
• The Mouse Status Test verifies the cursor position and
mouse button state. When a mouse button is pressed,
the corresponding button on the picture will change
color. If the mouse is a wheel or scroll mouse, an arrow
will indicate the direction the wheel is being rotated.
Clicking the wheel will flash the picture of the mouse in
the Mouse Status Test area.
• The Drag and Drop Test verifies a mouse can
successfully perform drag and drop operations. Left
click the picture of the CD and drag is onto the picture of
the drive. If successful, the picture will change.
• The Double Click Test verifies a mouse can successfully
perform double-click operations. Double-click on the
picture of the monitor. If successful, the picture will
change.
• Sound Test generates sounds for testing the speakers.
• USB Ports Test lists USB Devices.
Figure 7-9. USB Ports Test
Always shutdown the system and reboot after a
diagnostics session.
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6