Removable Media; Archiving And Loading Presets - GE LOGIQ e Basic Service Manual

Removable media

Archiving and loading presets

NOTE:
NOTE:
Archiving Presets to an DVD-R Disk (or USB memory device, SD Card)
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Refer to the latest revision of the User Manual to perform the
following tasks:
• Using Removable Media
• Labeling Removable Media
• Formatting Removable Media
• Verifying Removable Media
Always save presets before any software reload. This ensures
the presets loaded after the software reload are as up–to–date
as possible.
All user presets except changes to Summary, Anatomy, and
Biometry pages, can be saved on an DVD-R disk (or USB
memory device, SD Card) for reloading on the system.
Presets should NOT be saved on the same DVD-R disk (or USB
memory device, SD Card) as images. The Archive Menu lists
the images but does NOT list the presets stored on a DVD-R
disk (or USB memory device, SD Card).
1. Insert an empty (blank) DVD-R disk into the DVD-RW.
2. Access to the Utility/Config Menu, and select System. The
Backup sheet will be shown on the LCD display.
Figure 4-6. Backup Sheet
General procedures
4-13