Docking Cart Servicing
Periodic Maintenance Inspections
CAUTION
DANGER
CAUTION
CAUTION
12-24
It has been determined by engineering that your Docking Cart
system does not have any high wear components that fail with
use, therefore no Periodic Maintenance Inspections are
mandatory. Some Customers Quality Assurance Programs may
require additional tasks and or inspections at a different
frequency than listed in this manual.
Practice good ESD prevention. Wear an anti–static strap when
handling electronic parts and even when disconnecting/
connecting cables.
THERE ARE SEVERAL PLACES ON THE BACKPLANE, THE
AC DISTRIBUTION, AND DC DISTRIBUTION THAT ARE
DANGEROUS. BE SURE TO DISCONNECT THE SYSTEM
POWER PLUG AND OPEN THE MAIN CIRCUIT BREAKER
BEFORE YOU REMOVE ANY PARTS. BE CAUTIOUS
WHENEVER POWER IS STILL ON AND COVERS ARE
REMOVED.
Do not pull out or insert circuit boards while power is ON.
Do not operate this unit unless all board covers and frame
panels are securely in place. System performance and cooling
require this.
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6