Cart Using; Contents In This Section; Introduction; Height Adjustment - GE LOGIQ e Basic Service Manual

Docking Cart Setup

Contents in This Section

Introduction

Height Adjustment

11-40
• 'Introduction' on page 11-40
• 'Height Adjustment' on page 11-40
• 'Locking the Wheels' on page 11-41
• 'Mounting the System to Cart' on page 11-41
• 'Release the System from Docking Cart' on page 11-42
• 'Switch the Three Probes' on page 11-43
• 'System Operation' on page 11-43
Docking Cart supports the ultrasound system as below:
• LOGIQ e (Software version R8.x.x)
The docking cart can supply power for the system and
peripherals which are mounted to the docking cart.
To adjust the height of the mounting-platform, raise the Release
lever and pull the platform up or push it down with both hands,
the traveling distance is 140mm.
When the lever is released the platform remains at the adjusted
height.

Cart Using

LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6