Care and Maintenance
Contents in This Section
Safety test overview
10-26
Electrical safety tests
•
'Safety test overview' on page 10-26
•
'Leakage current limits' on page 10-29
•
'Outlet test - wiring arrangement' on page 10-31
•
'Grounding continuity' on page 10-32
•
'Chassis leakage current test' on page 10-33
•
'Data Sheet for enclosure Source Leakage Current' on
page 10-34
•
'Probe leakage current test' on page 10-35
•
'Definition' on page 10-35
•
'Tools' on page 10-35
•
'Generic procedure on probe leakage current' on
page 10-36
•
'Meter Procedure Using Probe Adapter' on page 10-36
•
'No Meter Procedure Using Probe Adapter' on page 10-36
•
'Data Sheet for Transducer Source Leakage Current' on
page 10-37
The electrical safety tests in this section are based on and
conform to IEC 60601-1 Medical Equipment Safety Standards.
They are intended for the electrical safety evaluation of
cord-connected, electrically operated, patient care equipment. If
additional information is needed, refer to the IEC 60601-1
documents
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6