GE LOGIQ e Basic Service Manual page 236

Diagnostics/Troubleshooting
Software Download (continued)
NOTE:
WARNING
7-26
8. As you verify that each feature works correctly, select
Passed. If all features work normally and Passed is filled in
for all features, type your signature and press OK. The
system is now ready for use.
If any of the features in the list is not supported in the
system, fill in Passed and do not need to verify it.
Figure 7-22. Item Passed
However, if any of the features DID NOT function as expected,
you need to select Failed for this feature. Type your signature
and select OK, then the System-Exit Window is displayed and
indicates that the system will return to the previous software
version. Select Exit and then reboot the system to complete
the previous state.
LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6