Using The Add-In Card Guide - Intel SR2100 Product Manual

NOTE
Before installing a riser card containing a full-length PCI card, you must reposition the
card guide (see Figure 18). To do this, pull arm (A) out enough to release the card
guide. Slide the guide from position (C) to position (B) in front of the fans.
Also, you must remove the add-in card extension from the end of the full-length PCI
card—the card will not fit in the system with the extension still attached.
A
OM11136
Figure 18. Using the Add-in Card Guide
36 Intel SR2100 Chassis Subassembly Product Guide