Table of Contents
Advertisement
12. Remove and save the six mounting screws (Figure 49, A) that hold the backplane to the bay.
A
B
B
OM09725
Figure 49. Removing the Hot Swap Backplane
13. Remove the backplane from the bay and place it in an anti-static bag.
14. Remove the new backplane from its packaging.
15. Orient the new board on the bay such that the locating pins on the bay (B) pass through the
board.
16. Attach the board to the bay using the six screws that you removed earlier.
17. Position the bay back into the chassis.
60
Intel SR2100 Chassis Subassembly Product Guide
Advertisement
Table of Contents
