Table of Contents
Advertisement
10. Slide the slim-line CD-ROM tray into the CD-ROM bay (see Figure 54).
11. Connect the CD-ROM IDE cable and power cables (Figure 54, A and B) to the connector at the
back of the CD-ROM drive.
12. Insert the recessed retention screws (Figure 54, C) through the access holes in the top of the
drive bay housing.
13. Insert the retention screw (Figure 54, D) on the front of the chassis.
14. If you removed a drive from the 3.5-inch drive bay to replace the CD-ROM drive, re-install it.
Maintaining the System
C
D
Figure 54. Installing a CD-ROM Drive
A
B
OM11139
65
Advertisement
Table of Contents
