5. Slide the slim-line CD-ROM tray into the CD-ROM bay.
6. Connect the provided CD-ROM IDE cable (Figure 24, A) and power cables (B) to the
connectors at the back of the CD-ROM.
7. Insert the recessed retention screws (C) through the access holes in the top of the drive bay
housing.
8. Insert the retention screw (D) on the front of the chassis.
9. Connect the CD-ROM IDE cable to the server board. (See Figure 13, H on page 31).
Assembling the System
C
D
Figure 24. Installing a Slim-line CD-ROM Drive
A
B
OM11139
41