Replacing The Cd-Rom; Removing The Cd-Rom Drive - Intel SR2100 Product Manual

Replacing the CD-ROM

1. If there is a drive in the 3.5-inch drive bay, remove it to have better access to the CD-ROM
drive.
2. Remove the three screws holding the drive to the chassis (Figure 52, C and D).
3. Disconnect the data (A) and power (B) cables from the drive.
4. Slide the drive tray out of the front of the chassis.
C
Maintaining the System
D
A. Data cable
B. Power cable
Figure 52. Removing the CD-ROM Drive
B
C. Screws
D. Retention screw
A
OM11145
63