Installing Optional Peripherals And Devices; Add-In Cards; Removing The Riser Card Assembly From The Server Board - Intel SR2100 Product Manual

Chassis subassembly product guide
Table of Contents

Advertisement

Installing Optional Peripherals and Devices

Peripherals and add-in cards are not included in your system and must be purchased separately and
installed. The following sections describe how to install:
Up to four hard drives into the system's hot swappable hard drive bay
A slim-line CD-ROM drive
A 3.5-inch drive into the system's drive bay
Up to two PCI add-in cards into the system's riser card

Add-In Cards

You can only add two PCI cards to this server. You must use the PCI slots on the riser card and
cannot use any expansion slots on the server board.
NOTE
Most PCI add-in cards must be installed when the riser card is removed from
the chassis due to limited space between the riser card and the power supply.
To install an add-in card:
1. Remove the chassis cover if the chassis is not already open.
2. Remove the four thumbscrews on the rear retention bracket that secure the riser card assembly
to the chassis. (See Figure 16.)
Figure 16. Removing the Riser Card Assembly from the Server Board
34
Intel SR2100 Chassis Subassembly Product Guide
OM11243

Advertisement

Table of Contents
loading

Table of Contents