Installing The I/O Shield - Intel SR2100 Product Manual

3. Remove the I/O shield and the server board from your server board kit.
4. Working from the inside of the chassis, position the I/O shield in the lower rear chassis
opening. Orient the shield so that the cutouts will align with the corresponding I/O connectors
on the server board. (See Figure 8.)
5. Make sure the metal fingers are on the inside of the chassis and snap the I/O shield into place.
6. Orient the board so that the I/O connectors on the board are positioned in front of the I/O
shield.
7. Insert the I/O connectors into the I/O shield and lay the server board flat on the chassis floor
standoffs.
26
A
Figure 8. Installing the I/O Shield
B
OM11053
Intel SR2100 Chassis Subassembly Product Guide