Cd-Rom Drive; Attaching A Slim-Line Cd-Rom Drive To The Cd-Rom Tray - Intel SR2100 Product Manual

CD-ROM Drive

Your server does not come with an integrated slim-line CD-ROM drive. You must purchase one
separately and install it. You should install a CD-ROM drive before you install a diskette drive.
NOTE
If you install another IDE device in addition to the CD-ROM, the new device
must be setup as the slave.
1. Remove the drive from its protective wrapper, and place it on an anti-static surface.
2. Set any jumpers and/or switches on the drive according to the drive manufacturer's
instructions.
3. Attach the CD-ROM drive to the CD-ROM tray using the mounting screws (Figure 23, A)
supplied with the system.
Figure 23. Attaching a Slim-line CD-ROM Drive to the CD-ROM Tray
4. Remove the screws that hold the filler panel to the front of the chassis and remove the panel.
40
A
OM09348
Intel SR2100 Chassis Subassembly Product Guide