Cleaning And Disinfecting The Handpiece Cord - EMS Hu-Friedy AIR-FLOW EL-308 Operation Instructions Manual

Cleaning and disinfecting the handpiece cord

Clean the surface of the handpiece cord using a cleaning wipe with proven efficacy (Enzol 2%).
Disinfect the surface of the cord using 70% isopropyl alcohol or other EPA recognized surface disinfectant, following carefully the instructions provided by the
disinfection solution manufacturer.
The use of scouring powder or an abrasive sponge will damage its surface.
Do not submerge the cord in a cleaning solution bath. It would be likely to be damaged.
Make sure the handpiece connection of the cord is dry.
28
FB-304_HS_ed_2014_06_Syst_AF.indd 28 5/5/2015 2:38:03 PM