Ricoh MP C6502SP Field Service Manual page 1514

Hide thumbs Also See for MP C6502SP:

Table of Contents

5. Troubleshooting

• If the folding operation causes to peel off the toner on the printout, change the roller

position to groove [F], which will reduce the pressure applied in the folding operation,

purposed for creating thick booklets.

• For more details, see page 47 of the Finisher SR4090 /Booklet Finisher SR4100 Field

Service Manual.

Corner Stapling Failure/Stack Failure/Large Misalignment

Some sheets fail to be stapled or large misalignments occur with corner stapling.

Stacking and stapling is disabled because the drag rollers [B] are stuck on top of the staple tray

[C]. This could happen when the trailing edge of the stacked sheets are curled, because curled

sheets tend to pull the drag rollers. Another causing factor is when the stack has to be removed

manually due to a failure in feeding out the stack.

How to check if the drag rollers are positioned correctly

1. Remove the rear upper cover.

Chapters

Table of Contents