5. Troubleshooting
Other 006: Original Size Misdetection
Symptom
When feeding originals with a different width perpendicular to the feed direction in Mixed Sizes mode,
the second original [A] fed through the ADF is detected as the wrong size [B]. Depending on the
combination of sizes (see chart below), this may cause a customer to be overcharged.
• This occurs depending on the value of SP5-131-001 (Paper Size Type Selection).
• This does not occur if the width of the two originals is the same perpendicular to the feed direction
(Ex., A3 SEF and A4 LEF).
• The symptom is limited to Mixed Sizes mode.
Value of SP5-131-001 is "0 (DOM/Japan)"
First original fed
A3 (SEF)
A3 (SEF)
A4 (LEF)
A4 (LEF)
LT (LEF)
B4 (SEF)
B5 (LEF)
LT (SEF)
A4 (SEF)
A4 (LEF)
A3 (SEF)
1496
Second original fed [A]
DLT (SEF)
LT (LEF)
B5 (LEF)
DLT (SEF)
B5 (LEF)
A4 (SEF)
LT (SEF)
B5 (SEF)
B5 (SEF)
B5 (SEF)
LT (SEF)
A4 (SEF)
B4 (SEF)
11x15 (SEF)
Size detected (error) [B]
A3 (SEF)
A4 (LEF)
A3 (SEF)
A4 (LEF)
B4 (SEF)
LT (SEF)
A3 (SEF)