Ricoh MP C6502SP Field Service Manual page 1521

Hide thumbs Also See for MP C6502SP:

Table of Contents

• Symptom 1:

With stapling, the width of the jogger fences during pre-stacking of the first 1-2 sheets is

narrower than with other modes. As a result, in some cases, the first sheet cannot be aligned

• Symptom 2:

Sometimes, the width of the jogger fences during stacking is narrower than expected. As a

result, one or more of the sheets juts out from the stack when the jogger fences close.

1. Set SP6116-001 to –014[CrnrStplrMxPrstkShAdj:2K/3K FIN] to a value of "-1" (disabled).

• After this is done, the interval between jobs will be longer. Therefore, in cases where

there are few sheets in each stapled set, productivity will be the same as with the

predecessor finisher (SR4040).

2. Update the SR4100/4090 firmware to Ver. 02.020:10 (P/N D7045300H) or newer.

[SP6116-XXX: CrnrStplrMxPrstkShAdj:2K/3K FIN]

Problems Related to Peripheral Devices

Chapters

Table of Contents